multi function hdd docking station driver

To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.

Note: For a hard drive duplicator you may need to switch the device to PC mode (if available). When you test the hard drive and hard drive dock or duplicator, it is recommended that you do the following: Ideally, you should test a component that you know works in another setup.

Use a different cable, hard drive, and hard drive dock or duplicator in your setup to see if the problem persists.

Use the cables, hard drives, and hard drive dock or duplicator in another setup to see if the problem is with the components or the setup.

To test your setup components, try the following: You can test to make sure that the following components are working correctly and are not the source of the issue:

When you troubleshoot issues with a hard drive dock or duplicator, there are some quick tests that you can complete to rule out potential problems. Universal Power Adapter (NA/JP, UK, EU, ANZ) OS independent No software or drivers required Secure Erase (NIST SP 800-88 Rev 1 - Purge)Ĭurrently tested with up to 4TB 5400 RPM 3.5' hard drives per bay (16TB total) and 1TB 5400 RPM 2.5' hard drives (4TB total) 1 media sanitation standard established by the National Institute of Standards and Technology.

Purging is a very secure method of erasing data from your storage device which complies with the NIST 800-88 Rev. As an external HDD dock, it can be connected to your host computer through USB 3.0 or eSATA, providing data transfer speeds up to 5 Gbps or 3Gbps respectively, from the hard drives to your computer system.įeatures Quick and Secure Erase functions and support for IDE hard drives using the included SATA to IDE hard drive adapter (SAT2IDEADP). This drive eraser ensures data is purged (a secure erase) which is required by government agencies and organizations who have strict guidelines on deleting data. Large capacity drives (tested with up to 4TB 3.5' and 1TB 2.5' drives per bay) can be used to greatly enhance your computer's storage/backup capabilities.Īble to perform 1:3 sector duplication, including HPA, from a single SATA drive onto three others simultaneously (at a rate of up to 72 MBps), the duplicator/docking station can save you time and effort. The duplicator can also function as a regular 4-bay hard drive docking station, by connecting to a host computer system. The SATDOCK4U3RE USB 3.0 and eSATA 1-to-3 Hard Drive Duplicator docking station enables you to duplicate/clone a single SATA hard drive to up to three other SATA drives simultaneously, as a standalone device.

Multi function hdd docking station driver